OS-6 Ozone Controller Data Sheet臭氧檢測儀
The OS-6 is an industrial grade ozone controller and monitor. The OS-6 design has been optimized for accuracy ease of installation setup and operation.
Features:
- Industrial strength water resistant enclosure.
- Large digital display auto-ranging (2-20ppm) w/ backlight.
- Easy front panel access to set points and relays.
- Precisely adjustable max min and fail time set points.
- Failure alarm if ozone remains outside control range.
- Front panel generator control cutoff switch for easy maintenance.
- User selectable PPM ranges for analog output (4-20 mA and 0-2 VDC)
- OSHA 0.1 ppm safety limit light.
Specifications:
- Enclosure: Wall mounted polycarbonate enclosure resists water spray and splash (NEMA 4X).
- Size: H = 6.3”/160mm W = 6.5”/166mm D = 4.6”/118mm.
- Power in: 12-24 VDC.
- Power out: +5 or +12-24 VDC to sensor.
- Data in: RS-232 serial data from remote sensor module (SM-4 or equivalent).
- Data out: RS-232 9600 Baud 8N1 format.
- Analog out: 0-2 V and 4-20 mA internal jumpers select full scale PPM range.
- Control in: Generator enable (contact closure).
- Control outputs: Relays 10A @ 25VDC 0.25A @ 250VDC 2.0 KVA AC (resistor).
- Relay functions: Ozone generator control >100 PPB safety limit failure to control.
- User controls (internal): MAX set point MIN set point FAIL time increase decrease.
- Numeric display: Four digits 0.5”/12mm auto-ranging with backlight.
- LED indicators: Sensor above MAX below MIN >100 PPB generator on failure
