imensional Readout | | English and Metric Gaging Range English: 0.005-10 inches; Metric 0.13-100 mm (depending upon material) |
Digital Resolution | English Units | ± 0.0001" on 1" range ± 0.001" on 10" range |
| Metric Units | ± 0.001 mm on 10 mm range ± 0.01 mm on 100 mm range |
Measuring Mode | | Sets mode for contact, delay line or immersion transducers |
Readout Mode | | Selects digital display for thickness or velocity |
Pulser | Risetime | 5 ns |
| Amplitude | 150, 250, 400 volts Peak into 50 Ohms |
| Repetition rate | 625, 1250, 2,500, 5000 Hz |
| Damping | 15 to 520 Ohms - 1 Ohm increments |
Receiver | Adjustable gain | 100 dB |
| Automatic gain control | 100 dB dynamic range |
| Reject | Variable threshold to full scale |
Bandwidth | Bandwidth | 30 MHz (3 dB down) |
Attenuator | Attenuator | 0, 10, and 20 dB selectable |
A-Trace Display | Sweep width | Switchable down to 50 ns/Div Continuously adjustable |
| Sweep delay | 1 ms to 80 ms |
| Display | Dual Trace; A-Trace plus selectable Gate Traces (IP, IF, T or TAC) |
| Display modes | Full wave RF, positive or negative Rectified |
T-Gate | | Thickness gate with adjustable sync |
T-Gate Start/Stop | | Selectable on positive or negative half cycles |
IP-Gate | | 0.25 to 20 ms (contact), 1.0 to 0 ms (continued) (delay or immersion) |
IF-Gate | | 0.1 to 8.0 ms |
TAC-Gate | | Adjustable thickness amplitude Compensation of gain Start control: 0.02 to 6 ms Amplitude control: 0 to 100 dB Slope control: 0.1 to 50 ms |
Alarms | | Three functions: LO, HI, LO/HI |
Outputs | | Alarms, Analog thickness Serial RS-232C, IP Sync and USB |
Inputs | | External sync |
Power Source | Power Source | Battery & AC |
Power Consumption | | 50 Watts |
Warranty | | One year |